Embedded product test Engineer

Minimum 3 years, B.E/B.Tech/M.Sc with electronics platform.

Job Role : Embedded product test Engineer

Relative Work experience : Minimum 3 years.

Educational qualification : B.E/B.Tech/M.Sc with electronics platform.

Required technical skills :

• Brief Knowledge on electronic components working, PCB assembly, PCB QC, Bill of materials, Schematic reading, PCB power test and test report making.
• Utilizing the electronic test equipment’s like Multimeter, CRO and Logical analyzer.
• Power regulator types and functionalities.
• Familiar with MCU families STM, ATMEL and equivalent 32-bit microcontrollers.
• Firmware loading in to MCU and well knowledge on its integral peripheral functionalities UART, RS232, RS485, SPI, I2C, ADC, DAC, CAN, counters, timers, watchdog timers, RTC and memory.
• Good knowledge in on-board peripherals like SD card, Accelerometer and wireless communications systems GSM & GPS.
• Good knowledge in external peripherals like field sensors (I.e temperature, pressure, fuel level.. etc)
• Good knowledge on validation of end to end embedded product testing Client Server application testing and Testing Knowledge on validation of Cloud application.

Responsibilities :

• Should be able to handle the product from board bring-up to delivery. i.e testing the required functionalities, debugging the minimal level difficulties and ability to grab knowledge from developers on requirement basis.
• Test case analyzation and report making.
• Requirement gathering at project initial level and ability to gather the requirement dependent parameters from field.
• Device initialization support in field.